Siemens RDG160KN Manuel de service télécharger pdf (Page 43)

43 / 60

Siemens RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation CE1P3181en

Building Technologies Functions 19 Jun 2009

Reloading the default timer settings

1. Press the program mode button twice to select the “Auto timer setting”

programming mode.

2. Press button

(OK) to enter the timer setting mode.

3. Press the program mode button for at least 3 seconds.

“rES” will be displayed.

4. Press button

(OK) to confirm reloading of the default timer settings

or button

(Esc) to leave without change.

The display will show “8888” during the reloading process.

When several timer sequences overlap, the resulting output is the OR combination

of the Comfort mode time of all timers.

A1 = 09:00 – 22:00

A2 = 12:00 – 20:00

Resulting output:

= 09:00 – 22:00

3181D119

09:00 12:00 20:00 22:00

4.12 Handling faults

When the room temperature is outside the measuring range, i.e. above 49 °C or

below 0 °C, the limiting temperatures blink, e.g. “0 °C” or “49 °C”.

In addition, the heating output is activated if the current setpoint is not set to “OFF”,

the thermostat is in heating mode and the temperature is below 0 °C.

For all other cases, no output is activated.

The thermostat resumes Comfort mode after the temperature returns to within the

measuring range.

4.13 Infrared remote control

Use the IRA211 infrared remote control to operate a thermostat with built-in

infrared receiver. The following operations can be carried out remotely:

• Select Protection, Comfort or Auto Timer mode

• Adjust setpoint in Comfort mode

• Select fan mode “Automatic” or “Manual”

A buzzer in the thermostat indicates remote control command reception.

Infrared remote control can be disabled via parameter P70.

Overlapping of timer

sequences

Temperature out

of range

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Siemens RDG160KN Manuel de service Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Thermostats Siemens RDG160KN