Siemens RDG160KN Manuel de service télécharger pdf (Page 41)

41 / 60

Siemens RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation CE1P3181en

Building Technologies Functions 19 Jun 2009

4.11 Auto timer (RDG100T only)

The thermostat provides an Auto Timer mode with 8 programmable timers.

Each timer can be assigned to one or several days. In this mode, the thermostat

automatically changes over between Comfort and Energy Saving mode according

to the preprogrammed timers.

1. Press the program mode button to enter the programming mode menu.

2. Press button

(OK) to enter the setting mode for the time of day.

The time digits start blinking.

3. Turn the rotary knob clock- or counterclockwise to set the time of day.

If the current time of day is in 24-hour format and you wish to change it to 12-hour

format, turn the knob clockwise passed 23:59 or counterclockwise passed 00:00.

If the current time of day is in 12-hour format and you wish to change it to 24-hour

format, turn the knob clockwise passed 12:00 pm or counterclockwise passed

12:00 am.

4. Confirm the time of day by pressing the right button

The weekday indicator starts blinking.

5. Turn the rotary knob clock- or counterclockwise to set the current weekday.

6. Confirm the current weekday by pressing button

(OK).

7. Press the program mode button

(Esc) to leave the program mode.

After a power failure, the time of day will blink to indicate power was lost.

However the auto timer will continue to run with the time before the power loss

occurred. Enter the setting mode to adjust the time of day if needed.

Setting the time of day

and the weekday

12-hour and 24-hour

format

Power failure

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

Siemens RDG160KN Manuel de service Page 41