Siemens RUGGEDCOM RSG2200 Spécifications télécharger pdf (Page 27)

RUGGEDCOM RSG2200

Installation Guide

Chapter 3

Communication Ports

Fiber Optic Ethernet Ports 21

Name

10/100Base-TX 1000Base-TX

Description

6 TX- BI_DA- Transmit Data-

or Bi-Directional

7 Reserved (Do Not Connect)

8 Reserved (Do Not Connect)

For specifications on the available copper Ethernet ports, refer to Section 4.4, “Copper Ethernet Port

Specifications”.

Section 3.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack), LC (Lucent

Connector), SC (Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the Transmit (Tx)

and Receive (Rx) connections of each port are properly connected and matched to establish a proper link.

Figure 21: MTRJ Port

1. Tx Connector 2. Rx Connector

Figure 22: LC Port

1. Tx Connector 2. Rx Connector

Figure 23: SC Port

1. Tx Connector 2. Rx Connector

Figure 24: ST Port

1. Tx Connector 2. Rx Connector

For specifications on the available fiber optic Ethernet ports, refer to Section 4.5, “Fiber Optic Ethernet Port

Specifications”.

Section 3.3

SFP Optic Ethernet Ports

SFP (Small Form-Factor Pluggable) optic Ethernet ports are available with LC (Lucent Connector) connectors.

Make sure the Transmit (Tx) and Receive (Rx) connections of each port are properly connected and matched to

establish a proper link.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

Pas de commentaire

Siemens RUGGEDCOM RSG2200 Spécifications Page 27