Siemens MC35 Spécifications télécharger pdf (Page 129)

AT Command Set

MC35_ATC_01_V05.00 Page 129 of 256 15.07.2002

4.45 AT+CSNS Single Numbering Scheme

The AT+CSNS command enables the ME to accept incoming calls when no bearer capability infor-

mation is provided with the call, e.g. single numbering scheme calls or calls originitating from analog

devices.

The command must be set before the call comes. By default, when you do not modify the settings,

all calls received without bearer element are assumed to be voice.

Please note that you can use the command if PIN authentication has been done during current ses-

sion. The setting will be automatically saved when you power down the GSM engine with AT^SMSO.

Test command

AT+CSNS=?

Response

+CSNS: (list of supported <mode>s)

Read command

AT+CSNS?

Response

+CSNS: <mode>

Write command

AT+CSNS=[<mode>]

Response

Write command

Parameters

<mode>:

0 Voice Each call received without bearer element is as-

sumed to be speech.

2 Fax Each call received without bearer element is as-

sumed to be an incoming fax.

4 Data Each call received without bearer element is as-

sumed to be a data call.

Please take into account that the bearer service

parameters set with AT+CBST apply to all data

calls including those received without bearer ca-

pability. To avoid conflicts see Chapter 4.5.

Reference

GSM 07.07

Note

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 255 256

Pas de commentaire

Siemens MC35 Spécifications Page 129