Siemens HiPath 8000 Spécifications télécharger pdf (Page 38)

Keyset Telephone User Features

A31003-H8022-F100-2-7618, October 2006

3-12 HiPath 8000 V2.2, Feature Description Guide

keyset_telephone_user_features.fm

Multiline Appearance

3.9.2 Functional Operation

For optiPoint 410/420 S keyset telephones, the system administrator can assign one of the

following ring preferences to each line appearance:

● Ring: The line always audibly alerts when an incoming call is presented and calling party

information appears on the display.

● No ring: The associated line key LED indicates an incoming call, but no audible alerting

occurs and no calling party information appears on the display.

● Delay ring: The line audibly alerts after a configured delay and calling party information

appears on the display. Refer to Section 3.2, “Delayed Ringing”, on page 3-3.

Calls are directed as follows:

● Calls to the primary line of a keyset are simultaneously directed to all other keysets that

have that line configured as a secondary line.

● Calls to a phantom line are simultaneously directed to all other keysets that have that line

configured as a shared phantom line.

The user can press the line key associated with a line at any keyset to originate, answer, hold,

and retrieve calls. The LED for each line key indicates the status of the associated DN and the

action of the telephone when a line key is pressed.

3.9.3 Networking

All line appearances must reside on the same switch and within the same IP addressing

domain.

3.9.4 CDR

The HiPath 8000 records the device and line used.

For the optiClient 130 S, multiline appearance is configured in the endpoint. Refer to

the

optiClient 130 S, V4.0, Administrator Documentation and Operating Instructions

for more information.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 237 238

Pas de commentaire

Siemens HiPath 8000 Spécifications Page 38