qsig_tunneling_features.fm
A31003-H8022-F100-2-7618, October 2006
HiPath 8000 V2.2, Feature Description Guide
12-1
QSIG Tunneling Features
Definition
12 QSIG Tunneling Features
This chapter describes SIP-Q, which permits the HiPath 8000 to interwork with another HiPath
8000, the HiPath 4000, or a QSIG PBX connected via the RG 8700 gateway.
12.1 Definition
The SIP-Q signaling method permits the HiPath 4000 and RG 8700 to interoperate with the
HiPath 8000. It also supports tunneling of QSIG/CorNet-NQ protocol over SIP protocol as a
trunking interface— for example, between two HiPath 8000s.
>
● Refer to the following for information about administration and operational
practices associated with this feature:
–
HiPath 8000 Configuration and Administration Using CLI Guide
–
HiPath 8000 Configuration and Administration Using NetManager iNMC
Guide
–
HiPath 8000 Subscriber Accounts/Services Administration Using
NetManager iSMC Guide
–
HiPath 8000 System Feature Configuration Using NetManager iNMC and
iSMC Guide
–
HiPath 8000 Assistant Administrator Documentation
–
HiPath 8000 Configuration and Administration Using HiPath Assistant
–
HiPath 8000 Assistant Feature Configuration Administration Guide
● Refer to the
HiPath 8000 Network Planning Guide
for information about network
planning.
● Contact your Siemens representative about the HiPath 4000 and RG 8700
publications that pertain to this feature.
>
●
QSIG
is a signaling protocol that permits the interconnection of other vendors’
QSIG-compliant PBXs (
QSIG PBXs
) to Siemens PBXs. It also provides for IP
network connectivity.
●
CorNet-NQ
is a Siemens proprietary QSIG-based signaling protocol for
interconnecting HiPath 8000 systems to one or more QSIG PBX systems. It is
a superset of the QSIG-defined Q.931/Q.932 protocol extensions.
Commentaires sur ces manuels