Siemens SL34A Manuel d'utilisateur Page 27

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 66
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 26
English
26
4. Starting Your Dishwasher
After you’ve prepared your dishes,
loaded your dishwasher, and added
dishwashing detergent and rinse aid, you
may start your dishwasher.
To start your dishwasher, you need to
know how to:
A. Select the Proper Wash Cycle
B. Operate the Controls
A. Select the Proper Wash Cycle
Dishwashing needs will vary from
household to household. Here are some
general guidelines that will help you select
the proper wash cycle for the best cleaning.
Remember, not every model of Siemens
dishwasher will have every available wash
cycle, so you should look to the Model
Features Chart on page 6 in this manual to
find out which cycles your model has.
The Regular Wash cycle will thoroughly
clean most normal, everyday loads having
loosely attached foods. More heavily soiled
dishware, and pots and pans with baked-
on, dried-on, or stuck-on foods will require
Scrub Wash or Power Scrub Plus, or they
may require soaking and hand-scouring. For
more lightly soiled dishware try Quick Wash.
A small load with normal soiling can be kept
in your dishwasher until you have enough
dishes for a full load by selecting the Rinse
and Hold Cycle. A small load can also be
placed in the top rack and given complete
washing by the Top Rack Only cycle. For
delicate or heirloom dishware and silver-
ware, or other special pieces, select
Delicate/Economy Wash, referring to the
Materials section on pages 12 and 13 of
this manual.
For more information on the wash cycles,
turn to the Siemens Features Descrip-
tion on pages 8 and 9 in this manual.
B. Operate the Controls
Though there are many models of Siemens
dishwashers, there are only two basic types,
based on the location of the control buttons:
1) Front Control, with buttons on the front of the
dishwasher door, as shown in Figure 22, and
2) Top Control, with the buttons on the top edge
of the dishwasher door, as shown in Figure 23.
Front Control
1. Close the dishwasher door and make
sure it is securely shut.
2. Press the On/Off button.
3. Press the button for the wash cycle
desired.
4. The dishwasher will start and
automatically continue operating until the
end of the selected cycle.
Figure 22/Ilus. 22
Figure 23/Ilus. 23
Operation | Fonctionnement | Operación
Vue de la page 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 65 66

Commentaires sur ces manuels

Pas de commentaire