Siemens SISTORE MX Manuel d'utilisateur télécharger pdf (Page 47)

Starting and stopping recording

Siemens Building Technologies

Fire Safety & Security Products 01.2008

NOTE

Please note that pre-alarm images will be saved permanently only after an alarm is triggered. If no

alarm is triggered, then the pre-alarm images will not be saved permanently. An alarm may be

triggered either by an event (e.g. motion detection) or by an operator, for instance when pressing the

alarm button during or after a bank robbery.

12.2 Triggering trial recording

Trial recording can be triggered with activated bank operation in the recording

mode via the menu Action -> Test alarm. As a result, all cameras – with the

exception of the CDM (Cash Dispensing Machine) cameras – record image

sequences of 5 frames.

Triggering trial recordings is recorded in the log book so that it is possible to search

selectively for trial recordings at a later date.

As the recordings must be available permanently, they are not deleted if the

recording capacity has been used up completely. A deletion only takes place if the

number of pre-set recordings has been exceeded.

Fig. 24 Triggering test recording

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 135 136

Pas de commentaire

Siemens SISTORE MX Manuel d'utilisateur Page 47