Siemens SISTORE MX Manuel d'utilisateur télécharger pdf (Page 114)

SISTORE MX RemoteView

114

Siemens Building Technologies

Fire Safety & Security Products 01.2008

19.15 Remote control of alarm outputs

You can activate the alarm outputs, which were configured for this. To do so, you

must have the authorisation “remote control“.

Fig. 65 Alarm outputs

You can activate the alarm outputs by clicking onto the LED-symbol. The alarm

outputs must have been defined as a special function (see Configuration Manual,

Section 10).

Alarm outputs which were configured with “pulse-negative/positive” mode cannot

be deactivated, because the length of the pulse was determined in the

configuration and cannot be changed manually.

NOTE

In contrast to the SISTORE MX server / SISTORE MX NVS server, the LEDs indicating the status of

the alarm outputs are in the bottom row of the display.

19.16 Local revision of existing databases

In SISTORE MX RemoteView databases may also be revised without a direct

connection to the recording SISTORE MX system (without LAN or ISDN

connections). Both Message and Record database must be available for this to

take place.

You open a database via the menu Administration -> Playback or by clicking the

button Play (s. header) in the toolbar. The dialog box “Select Directory“ will then

appear, in which the directory containing the database should be entered and the

database clicked on. After confirmation using the Select button, the database is

loaded and the same dialog box as in the SISTORE MX “playback mode” will

appear. The revision can be carried out in the same way as in SISTORE MX, as all

functions are available.

19.17 Remote system reboot

With the menu sequence Action -> System reboot you can reboot SISTORE MX.

To do so you need “Administrator” authorisation.

You have to acknowledge 3 safety queries, then the reboot can be executed.

That SISTORE MX after a reboot starts again automatically, the following

conditions must be fulfilled:

z Automatic login to Windows

z SISTORE MX in the autostart file (the set-up enables this automatically,

condition on delivery)

Only after the restart a connection to SISTORE MX can take place. The restart can

take quite 1 minute or more.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 135 136

Pas de commentaire

Siemens SISTORE MX Manuel d'utilisateur Page 114