Siemens SISTORE AX9 Guide d'installation télécharger pdf (Page 8)

Safety

Siemens Building Technologies

Fire Safety & Security Products 03.2009

Damage to the device due to overvoltage

z Connect the device only to power sources with the specified voltage. Voltage

supply requirements can be found on the power supply unit/type label.

Dangerous situation due to false alarm

z Make sure to notify all relevant parties and authorities providing assistance

before testing the system.

z To avoid panic, always inform all those present before testing any alarm

devices.

Risk of failure due to incorrect installation

z Install the fault current circuit breaker for the unit separately from the fault

current circuit breaker for the building.

Danger of electrical shock when using uninsulated tools

z Use only insulated tools during initial startup and when performing maintenance

or repair while the device is running and observe the relevant safety precautions.

2.2.4 Installation

Cable damage due to mechanical load

z When connecting the cables, do not apply tensile force and make sure not to

bend or damage them.

Data loss after update

z Make sure to backup all data before updating the device

Mounting and tools

z Use a low-impact screwdriver

z Recommended plane level for mounting: 0.2 mm or less

z Spacing between system cabinets: 1.2 mm or more

2.2.5 Service and maintenance

Risk of electric shock during maintenance

z Always disconnect the power cable and other cables from the device before

performing maintenance.

Danger of electrical shock while cleaning the device

z Disconnect the device from the mains supply before cleaning it.

z Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Pas de commentaire

Siemens SISTORE AX9 Guide d'installation Page 8