Siemens SISTORE AX9 Guide d'installation télécharger pdf (Page 17)

Installation and replacement of hard disk drives

Siemens Building Technologies

Fire Safety & Security Products 03.2009

4. Remove the hard disk frame securing

screw and the connection cables, and

slide the frame out of its mounting.

5. After removing the screws, take out the

faulty HDD from the frame and fit

replacement hard disk unit into the

frame (the cable connection side points

towards the inside of the unit), and

secure using the four screws.

6. Connect the two cables – see arrows –

1 x power supply,

1 x data

to the hard disk unit.

7. Secure the hard disk frame including

the hard disk unit in the SISTORE using

the two screws.

NOTE

The Flat cable between front board and main board should be placed as it was. It needs to be placed

on the HDD bracket as displayed in the image.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Pas de commentaire

Siemens SISTORE AX9 Guide d'installation Page 17