Siemens P1 Manuel d'utilisateur télécharger pdf (Page 20)

Siemens APOGEE™ FLN (P1) Communication Kit

4-2 For more information visit: www.EatonElectrical.com

MN04008002E

February 2006

2. Set the FLN address for the device if desired (default address is 99).

Parameter P1.13.9 = (1 – 99)

The drive is set up for FLN network communication.

For more information about the description of some parameters, see the HVX9000 User

Manual, HVX9.11 or later version.

Communication Timeout

The RS-485 Communication Board initiates a communication error if communication is

broken for as long as deﬁned by the Communication Timeout. Communication Timeout is

disabled when given a 0 value.

Communication Status

To see the present status of the communication board, enter the Communication status page

from the Monitor menu (G7.5.2). See Figure 4-1 and Table 4-2.

Figure 4-1: Communication Status

Table 4-2: Communication Message Indications

Messages Indications

Good messages

0 – 999 Number of messages received without communication errors

Error messages

0 – 64 Number of messages received with CRC or parity errors

Comm. status

Monitor

V1 V1

0.841

Good Message

Error Message

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Siemens P1 Manuel d'utilisateur Page 20