Siemens Codelock K44 Duo Manuel d'utilisateur télécharger pdf (Page 12)

100

101

20 K44 Duo Installation & User manual

ENG

K44 Duo Installation & User manual 21

ENG

Using K44 Duo

Entrance

To open the lock, a 4-digit (or 6-digit) code should

be entered on the code lock’s keypad.

K44 Duo is blocked if a visitor performs 12 key-

presses without nding the correct code. To re-

lease the blockage, enter a correct code twice in

succession.

Unlock the door permanently

To unlock the door permanently, proceed as fol-

lows:

1 Press B.

2 Enter the entrance code.

3 Enter 1.

The door is now unlocked (green LED is lit). To

lock the door, follow the above steps, only enter 0

in step 3 instead.

Delay on/off

When this function is activated, the following hap-

pens: If a code is programmed to open two doors,

lock relay 2 is not activated until door 1 has been

opened and closed.

If door 2 is opened with the exit button, door 2 has

to be opened and closed before door 1 can be

opened.

Note that door contacts must be connected and

that Door control must be activated for this to

work.

This is how to activate Delay:

1 Press B and enter the current password.

2 Enter A80.

3 Enter 1.

To deactivate Delay, press 0 in step 3 instead.

Erase the memory

This is how to erase all programmed information

(including the password):

1 Press B and enter the current password.

2 Press SW1 on K44 Duo’s circuit board.

3 Enter 112186.

4 Enter 112186 once again. The memory is now

erased and K44 Duo goes back to the factory

settings.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 100 101

Commentaires sur ces manuels

Pas de commentaire

Siemens Codelock K44 Duo Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Siemens Codelock K44 Duo