Siemens SIMATIC PC Adapter TS Adapter Spécifications télécharger pdf (Page 39)

SIMATIC Industrial Software Engineering Tools TS Adapter IE

Manual, 06/2008, A5E00977705-02

Commissioning

6.1 Overview

Commissioning options

In the factory state and after a parameter reset, the IP parameters of the TS Adapter IE are

set so that remote maintenance and e-mail are not possible.

The following table shows an overview of the various options for commissioning the

TS Adapter IE into operation:

Commissioning ...

Step

... by direct connection via an

Ethernet connection

... via a remote connection with

TeleService

... via a remote connection without

TeleService

1 Set IP parameters by direct

connection:

• With TeleService

• With the SIMATIC Manager

Establish remote connection:

• With TeleService

Establish remote connection:

• By dial-up

2 Open configuration interface by

direct connection:

• With TeleService

• With a browser

Open configuration interface via a

remote connection:

• With TeleService

Open configuration interface via a

remote connection:

• With a browser

Configuration for remote maintenance or e-mailing

Carry out remote maintenance or send e-mail

For details on the individual commissioning tasks, refer to the subsections of the same

names in the "Working with the TS Adapter IE" chapter.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 102 103

Pas de commentaire

Siemens SIMATIC PC Adapter TS Adapter Spécifications Page 39