Siemens IEEE802.11 Instructions d'exploitation télécharger pdf (Page 178)

Configuring with Web Based Management

5.5 "System" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

178 Configuration Manual, 11/2014, C79000-G8976-C323-03

5.5.13

Auto Logout

Setting the automatic logout

On this page, set the times after which there is an automatic logout from WBM or the CLI

following user in activity.

If you have been logged out automatically, you will need to log in again.

Note

No automatic logout from the CLI

If the connection is not terminated after the set time, check the setting of the "keepalive"

function on the Telnet client. If the set time interval is less than the configured time, the lower

value applies. For example, you have set 300 seconds for the automatic logout and 120

seconds is set for the "keepalive" function. In this case, a packet is sent every 120 seconds

that keeps the connection up.

Procedure

1. Enter a value of 60-3600 seconds in the "Web Base Management (s)" input box. If you

enter the value 0, the automatic logout is disabled.

2. Enter a value of 60-600 seconds in the "CLI (TELNET, SSH) (s)" input box. If you enter

the value 0, the automatic logout is disabled.

3. Click the "Set Values" button.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 291 292

Pas de commentaire

Siemens IEEE802.11 Instructions d'exploitation Page 178