Siemens ET 78X Series Instructions d'exploitation télécharger pdf (Page 194)

DNC Plant/DNC Cell (FBDN1) 05.07

10 Configuration

FBDN1/10-186 Motion Control Information System DNC (FBDN) - 04/10 Edition

 Command for list request

DlgSendListCmd is the command for requesting a list of NC data files via the

dialog function. The parameter is a string that must be formulated in

accordance with the NC program. It must be in the first line of the NC data file.

Extract from the machine configuration file:

DlgSendListCmd=(SL)

 Command for upload

DlgReceiveCmd is the command for responding to a request. The parameter

is a string that must be formulated in accordance with the NC program. Two

programs are sent successively:

Request program

Program to be transferred back

Extract from the machine configuration file:

DlgReceiveCmd=(R)

 External dialog interpreter

This parameter contains the name of an optional dialog interpreter. You can

use the external dialog interpreter to carry out project-specific name

conversions. You have to enter the program ID (ProgID) of the dialog

interpreter to be used. It comprises the following elements:

ComponentName.ClassName.

Extract from the machine configuration file:

DlgConverter=DNCDlgI.DNCCntrl

 Type of interpretation

You can use this parameter to assign an additional ID for the code conversion

type to the external dialog interpreter.

Extract from machine configuration file:

DlgSubNumber=0

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 348 349

Pas de commentaire

Siemens ET 78X Series Instructions d'exploitation Page 194