Siemens EK 730 Series Instructions d'exploitation télécharger pdf (Page 11)

Description

3.3 Reset button

SCALANCE W770/W730

Operating Instructions, 11/2014, C79000-G8976-C325-04

3.3

Reset button

The reset button (position ①) is on the top of the housing:

Functions of the reset button

The reset button has the following functions:

●

Restart of the device

To restart the device, press the Reset button briefly.

Note

If you make changes to the configuration and restart immediately afterwards with the

reset button, the changes may be lost. If you restart the device using the WBM (menu

command "System > Restart") or using the CLI (command "restart" in the Privileged

EXEC

Modus), the configuration changes are always retained.

●

Loading new firmware

If the normal procedure with the "Load & Save" menu of Web Based Management is

unsuccessful, the reset button can be used to load new firmware. This situation can occur

if there is a power outage during the normal firmware update. You will find more detailed

information in the configuration manual SCALANCE W770/W730 WBM.

●

Restoring the default parameters (factory defaults)

You will find more detailed information in the configuration manual SCALANCE

W770/W730 WBM.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Pas de commentaire

Siemens EK 730 Series Instructions d'exploitation Page 11