Siemens BUSINESS CLASS 5935 Manuel d'utilisateur télécharger pdf (Page 48)

SIEMENS 5930/5935 Business Gateway

User’s Guide

Chapter 5 Advanced Setup

QoS

SIEMENS 42

QoS

Quality of Service (QoS) actively manages network resources to sustain service levels for priority applications.

To configure QoS:

1. Click QoS in the left navigation pane of the Router Information page. This displays the QoS Configuration

page. This page shows the current settings as well as provides a means to change the current settings.

2. Select one of the following from QoS Status to enable or disable QoS:

• On: QoS will forward packets and set diffserv marking based on user defined mapping rules and

enabled QoS policies.

• Off: QoS will forward packets based on pre-defined mapping rules and enabled QoS policies.

3. To enable or disable marking of the Differentiated Services field of the IP header, select one of the

following from DiffServ Status:

• On: QoS will mark the DiffServ field according to the QoS Policies and pre-defined behavior.

• Off: DiffServ is not marked; this is DiffServ pass through.

4. Assign weight values to four different priorities. This can be a number between 1 and 255.

5. Click Apply.

6. Configure QoS policies

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 93 94

Pas de commentaire

Siemens BUSINESS CLASS 5935 Manuel d'utilisateur Page 48