Siemens MC35 Manuel d'utilisateur télécharger pdf (Page 9)

AT Command Set

MC35_ATC_01_V04.00 Page 9 of 238 02.04.2002

8.2 176f AT^MONI Channel numbers are now issued in the form of 4-digit

numbers. Therefore, the examples on page 176 have

been updated.

Frequency hopping will now be indicated with “h” (in-

stead of the previously used “0”.

Notes modified: If during a connection the radio cell is

changed, the parameters LAC, Cell, NCC BCC, PWR

and RXLev of the ‘Serving Cell’ part will not be up-

dated.

8.7 184 AT^SCKS Notes regarding empty SIM card tray modified.

8.9 186 AT^SCTM Chapter revised due to improved presentation of tem-

perature shutdown URCs.

9.2 - 9.3 229f - 231f AT+CXXCID

AT^SCID

AT^SGAUTH

Both commands now independent of PIN authentica-

tion

Command added to list of PIN independent com-

mands

9.1 - 9.1.19

9.1.12

214 - 228f

224

Lists of result codes restructured.

Notification number 300 added: “Called party barred incoming call”

9.4

9.4.1

233f

235f

*# codes Chapter revised. Further examples added.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 237 238

Pas de commentaire

Siemens MC35 Manuel d'utilisateur Page 9