Siemens MC35 Manuel d'utilisateur télécharger pdf (Page 118)

AT Command Set

MC35_ATC_01_V04.00 Page 118 of 238 02.04.2002

4.44 AT+CSCS Set TE character set

Test command

AT+CSCS=?

Response

+CSCS: (list of supported <chset>s)

Read command

AT+CSCS?

Response

+CSCS: <chset>

Write command

AT+CSCS=[<chset>]

Response

Write command informs TA which character set <chset> is used by the TE.

TA is then able to convert character strings correctly between TE and ME

character sets.

Parameters

<chset>:

"GSM" GSM default alphabet (GSM 03.38 subclause 6.2.1);

Note: This setting may cause software flow control problems due

to values of XON/XOFF characters.

"UCS2" 16-bit universal multiple-octet coded character set (ISO/IEC10646

[32]); UCS2 character strings are converted to hexadecimal num-

bers from 0000 to FFFF; e.g. "004100620063" equals three 16-bit

characters with decimal values 65, 98 and 99, $(AT R97)$

Reference

GSM 07.07

Note

• Also see chapter “Supported character sets“, pg. 12.

• When TA-TE interface is set to 8-bit operation and used TE alphabet is

7-bit, the highest bit will be set to zero.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 237 238

Pas de commentaire

Siemens MC35 Manuel d'utilisateur Page 118