Siemens SpeedStream 5450 Manuel d'utilisateur télécharger pdf (Page 21)

Chapter 4

SpeedStream Router Setup

This chapter describes how to connect to and setup your router configuration.

This chapter describes the steps to set up the router configuration using the Setup Wizard. Other

configuration may also be required on the router, depending on which features and functions of the router

you wish to use. Use the table below to locate detailed instructions for the required functions.

To do this Refer to

Configure users and devices on the router. Chapter 5, Configuring Users and Devices

Configure router advance options such as ISP

connections, networking options, and security.

Chapter 6, Configuring Advanced Features

Monitor the health of the router. Chapter 7, Monitoring Router Health

Before Configuring the Router

Before attempting to configure the router, please ensure that:

• Your computer can establish a physical connection to the router. The computer and the router must be

directly connected using Ethernet ports on the router.

• The router is installed correctly and powered on.

• The TCP/IP protocol is installed on all computers on your network. (If you need to install TCP/IP, refer

to your system documentation or Windows Help.)

• The network settings on each computer are correctly configured.

From this point on, you will perform all configuration of the router from your computer using the Web

browser-based setup program.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 82 83

Pas de commentaire

Siemens SpeedStream 5450 Manuel d'utilisateur Page 21