Siemens KDN Series Instructions d'exploitation télécharger pdf (Page 56)

KINCO

Note：Change the value of 8-30 to 2 on the Danfoss Frequency Converter for modbus protocol

（Change the value of 8-30 to 0 for the Danfoss Protocol）

Frequency Converter

8-3* FC Port Setting

8-30 protocol

*[0] FC (danfoss protocol)

[2] Modbus (modbus protocol)

8-31 address

1 – 247 * 1 (HMI station No.)

8-32 FC Port Baud Rate

[0] 2400 Baud

[1] 4800 Baud

*[2] 9600 Baud

8-33 FC Port Parity

*[0] even, 1 stop bit

[1] Odd, 1 stop bit

[2] None, 1 stop bit

[3] None, 2 stop bit

Frequency Converter setting

Please refer to the manual of Danfoss Frequency Converter for details

Supported Device

Danfoss Protocol:

Device Bit Address Word Address Format

EEPROM Register(Double Word) ———— EPD0-7998.99999 DDDD.DDDDD

EEPROM Register ———— EPW0-7998.99999 DDDD.DDDDD

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 257 258

Pas de commentaire

Siemens KDN Series Instructions d'exploitation Page 56