Siemens SISTORE AX9 Manuel d'installation télécharger pdf (Page 11)

Installation

Siemens AG EN

05.2010

NOTE

z Your DVR can be used with either PAL or NTSC equipment.

z You cannot mix PAL and NTSC equipment. For example you cannot use a PAL camera and an

NTSC monitor.

6.1 Connecting the video input

Fig. 3 Video input connectors

Connect the coaxial cables from the video sources to the BNC Video In

connectors.

6.2 Connecting the loop-through video

Fig. 4 Video loop-through connectors

If you would like to connect your video source to another device, you can use the

Loop BNC connectors.

NOTE

The Loop BNC connectors are auto terminated. Do not connect a cable to the Loop BNC unless it is

connected to a terminated device because it will cause poor quality video.

6.3 Connecting the monitor

Fig. 5 Video Out connectors

Connect the main monitor to the Video Out connector.

Connect the spot monitor to the SPOT connector as needed.

6.4 Connecting a VGA monitor

Fig. 6 VGA connector

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

Siemens SISTORE AX9 Manuel d'installation Page 11