Siemens SIMATIC IPC427C Instructions d'exploitation télécharger pdf (Page 32)

Installing/mounting

5.4 Mounting on DIN rails

SIMATIC IPC427C

32 Operating Instructions, 10/2010, A5E02414743-03

Steps for mounting on DIN rails

1. Set the device inclined on the

upper DIN rail.

2. Swing the device fully onto the rails

until both clamps completely latch.

Note

To ensure secure mounting on vertical mounting rails, a DIN rail ground terminal should be

mounted beneath the device.

NOTICE

The rails are secured to a wall or cabinet similar to mounting with mounting brackets.

Ensure that the wall or ceiling can hold four times the total weight of the device (including

the rails and additional expansion modules). Also see section Mounting with mounting

brackets (Page

33).

Removing the device from the DIN rail

● Push down the device until the clamps release it.

● Swing the device out of the rails.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 181 182

Pas de commentaire

Siemens SIMATIC IPC427C Instructions d'exploitation Page 32