Siemens TC35 Terminal Spécifications télécharger pdf (Page 81)

AT Command Set

TC3X_ATC_01_V04.00 Page 81 of 204 29.05.2002

4.19 AT+CLIP Calling line identification presentation

Test command

AT+CLIP=?

This command refers to the GSM supplementary service CLIP (Calling Line

Identification Presentation) that enables a called subscriber to get the calling line

identity (CLI) of the calling party when receiving a mobile terminated call.

Response

+ CLIP: (list of supported <n>s) OK

Parameter

See write command

Read command

AT+CLIP?

Response

+CLIP: <n>, <m> OK

If error is related to ME functionality:

+CME ERROR: <err>

Parameter

See write command

Write command

AT+CLIP=<n>

Set command enables or disables the presentation of the CLI at the TE. It has no

effect on the execution of the supplementary service CLIP in the network.

Response

If error is related to ME functionality:

+CME ERROR: <err>

Parameter

<n> 0 suppress unsolicited result codes

1 display unsolicited result codes

<m> 0 CLIP not provisioned

1 CLIP provisioned

2 unknown

Unsolicited result

code

When CLIP is enabled at the TE (and is permitted by the calling subscriber), an

unsolicited result code is returned after every RING (or +CRING: <type>) at a

mobile terminating call.

Voice call response format:

+CLIP: <number>, <type>,,,,<CLI validity>

Data/FAX call response format:

+CLIP: <number>, <type>

Parameter

<number> string type phone number of calling address in format specified by

<type>

<type> type of address octet in integer format; 145 when dialling string

includes international access code character “+”, otherwise 129.

0 CLI valid

1 CLI has been withheld by the originator.

3 CLI is not available due to interworking problems or limitations

of originating network. <number> shall be an empty string ("")

and <type> value will not be significant.

Reference

GSM 07.07

Note

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 203 204

Commentaires sur ces manuels

Pas de commentaire

Siemens TC35 Terminal Spécifications Page 81

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Siemens TC35 Terminal