Siemens RUGGEDCOM RSG2200 Guide d'installation télécharger pdf (Page 14)

Installation

4 Installation

4.1 Rack Mounting

Figure 10: RSG2000 Family 19” Rack Mount Adapters

Figure 11: Rack mount adapter mounting location

The RSG2000 family of products can be rack mounted using the included rack mount adapter

assemblies shown in Figure 10. Secure the rack mount adapter to the front side of the chassis

using the included black PAN head Phillips screws in the positions shown in Figure 11. The entire

chassis can then be mounted to a standard 19” rack. An additional two rack mount adapters are

included to optionally secure the rear of the chassis in high-vibration, or seismically active

locations.

Note: Since heat within the RS2000 is c

hanneled to the enclosure, it is recommended that 1 rack-

unit of space (1.75”) be kept unpopulated and free of equipment above each RS2000 series

product to allow for a small amount of convectional airflow. Although forced airflow is not

necessary, any increase in airflow will result in a reduction of ambient temperature that will improve

long-term reliability of all equipment mounted within the rack space.

RuggedCom

RuggedSwitch

RSG2200 Installation Guide rev115

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Pas de commentaire

Siemens RUGGEDCOM RSG2200 Guide d'installation Page 14