Siemens RUGGEDCOM RS8000 Spécifications télécharger pdf (Page 14)

Chapter 2

Installing the Device

RUGGEDCOM RS8000

Installation Guide

8 Connecting Power

Figure 4: Panel Mounting

1. Screw 2. Panel/DIN Rail Adaptor

2. Install the supplied screws to secure the adapters to the panel.

Section 2.2

Connecting Power

The RS8000 supports a single integrated high AC/DC or low DC power supply

NOTE

• For 88-300 VDC rated equipment, an appropriately rated circuit breaker must be installed.

• For 100-240 VAC rated equipment, an appropriately rated circuit breaker must be installed.

• A circuit breaker is not required for 12, 24 or 48 VDC rated equipment.

• Power input terminals have reverse polarity protection for 12, 24 and 48 VDC rated equipment.

• Equipment must be installed according to applicable local wiring codes and standards.

The following sections describe how to connect power to the device:

• Section 2.2.1, “Connecting AC Power”

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 29 30

Pas de commentaire

Siemens RUGGEDCOM RS8000 Spécifications Page 14