Siemens ET9 Series Manuel d'utilisateur télécharger pdf (Page 12)

 

ENG

Installation

Mechanical

Please mount the reader at a suitable height also

catering for disabled persons.

1. Open the reader with the key supplied. The

lock is located beneath the keypad.

2. Fasten the back plate against the wall, using

three screws , and  according to gure

1. Seal the screw and cable holes with sealant

if the reader is externally mounted.

3. Make sure the back plate is earthed. Use a

separate cable to the earthing point. Make

sure the front and back plates are connected

with an insulated cable.

4. Fit the front and check that the reader is se-

curely fastened.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Commentaires sur ces manuels

Pas de commentaire