Siemens EF 711 Series Guide de l'utilisateur télécharger pdf (Page 110)

Configuring the Wireless AP

Configuring Wireless AP Settings

SCALANCE WLC711

3-22 C79000-G8976-C260-03, 07/2012, User Guide, V8.11

Host Name Read-only. This value, which is based on AP Name, cannot be

directly edited. This value depicts the AP Host-Name value. If the

AP Name value does begin with a number, for example when it is

the AP's serial number, the AP's model is prepended to the value.

This value is used for tracking purposes on the DHCP server.

Name Displays the Ethernet port of the SCALANCE IWLAN Controller to

which the Wireless AP is connected.

Location Define the location of the Wireless AP.

Zone Select a (Policy) Zone for the specified AP. The Zone identifies the

location-based policy.

Description Type comments for the Wireless AP.

AP Environment Click the Wireless AP’s environment — Indoor or Outdoor.

Note:

The AP Environment drop-down is displayed on the AP

Properties tab only if the selected Wireless AP is the Siemens

Outdoor Wireless AP.

The Siemens Outdoor Wireless AP can be deployed in both

indoor and outdoor environments.

Topology Read only. Displays the Topology name.

Hardware Version Read-only. Displays the current version of the Wireless AP

hardware.

Application Version Read-only. Displays the current version of the Wireless AP

software.

Status Approved — Indicates that the Wireless AP has received its

binding key from the SCALANCE IWLAN Controller after the

discovery process.

If no status is shown, that indicates that the Wireless AP has not

yet successfully been approved for access with the secure

SCALANCE IWLAN Controller.

You can modify the status of a Wireless AP on the Access

Approval screen. For more information, see “Modifying a

Wireless AP’s Status” on page 3-19.

Active Clients Displays the number of wireless devices currently associated with

the Wireless AP.

Country Click the country of operation. This option is only available with

some licenses.

Note: The antenna you select determines the available channel

list and the maximum transmitting power for the country in which

the Wireless AP is deployed.

Middle Antenna Type Click to select No Antenna or choose an antenna type from the

drop-down list.

Left Antenna Type Click to select No Antenna or choose an antenna type from the

drop-down list.

Table 3-8 AP Properties (continued)

Field Description

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 491 492

Commentaires sur ces manuels

Pas de commentaire

Siemens EF 711 Series Guide de l'utilisateur Page 110

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Siemens EF 711 Series