Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 20005 Manuel d'utilisateur télécharger pdf (Page 39)

Establishing a Connection, Continued

3. At the > prompt type: login password and press ↵ Enter.

The Connect Screen will appear with the login information and the

local prompt. The local prompt indicates that you are communicating

with the ANCB connected directly to the PC.

You are now ready to configure the ANCB, go to page

30.

Remote Connection

Log On

Once your PC is connected to a network device you can connect to any

other device on the same network if you know the IP address of the

Maxum.

1. Open Windows HyperTerminal program on your PC.

2. Press ↵ Enter twice, the Command Request dialog box will appear.

3. At the > prompt type: login password [IP Address].

Example: login password 192.167.0.1

Once the password is verified the system responds with the login

information and displays the remote prompt which includes the IP

address of the connected device.

2000592-001 Data Communications Setup • 29

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Pas de commentaire

Siemens ADVANCE NETWORK COMMUNICATIONS BOARD/DATANET 20005 Manuel d'utilisateur Page 39