Siemens E12 Manuel d'utilisateur télécharger pdf (Page 15)

Industry Automation and Drive Technologies - SCE

TIA Training Document

Page 15 of 47 Module

E12

Status: 01/2010 Vision Sensor Shape Check with SIMATIC S7-300F 2PN/DP and VS120

4.2 Configuring the Hardware

6. With a double click, open the configuration tool for the ’Hardware’. (→ Hardware)

7. Open the hardware catalog by clicking on the symbol ' ’. (→ )

Insert the ’Mounting Channel’ with a double click (→ SIMATIC 300 → RACK-300

→ Mounting Channel).

Note:

Then, a configuration table is displayed automatically for setting up Rack 0.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 46 47

Pas de commentaire

Siemens E12 Manuel d'utilisateur Page 15