Siemens Advance Network Gateway Manuel d'utilisateur télécharger pdf (Page 63)

DataNET Troubleshooting Guide, Continued

Configuration

Parameter Errors

The device may have an invalid or duplicate IP address, Subnet mask or

iproute. Each ANCB must have a

unique IP address. Verify the

configuration parameters by connecting a PC serial port to the

Configuration Port, Logging in and typing config display.

local> config display

Config:

Device ANCB_DN

address ip 172.16.9.239

netmask 255.255.0.0

address ethernet 00.c0.c9.00.d2.3b

iproute 0.0.0.0

time server ip 0.0.0.0

port1 DataNET Copper

port2 DataNET Copper

Device ID

The ANCB/DN device id is automatically assigned and is not user

configurable as it is on the DataNET Hub. Th ANCB/DN device ID is

automatically set to the board IP address at power up or reset. :

Broadcast Status

Information

The Advance Network device periodically broadcast their status for

diagnostic and network routing purposes.

2000592-001 Troubleshooting • 53

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 71 72

Pas de commentaire

Siemens Advance Network Gateway Manuel d'utilisateur Page 63