Siemens SIMATIC NET CP 343-1 Manuel d'utilisateur télécharger pdf (Page 36)

7 Web Diagnostics

B3L−36

CP 343-1 Lean for Industrial Ethernet / Manual Part B3L

Release 03/2007

C79000-G8976-C198-04

7.2.2 Identification

Here, you can see a variety of information on the CP for identification and

maintenance.

Parameter Function

Identification

Plant designation

Plant designation of the CP if this was configured.

Location identifier

Location identifier of the CP if this was configured.

Serial number Serial number of the CP

Order number Order number of the CP

Version

Hardware Hardware version of the module

Firmware Version of the stored firmware

A CP acting as PROFINET IO device can be informed of the plant designation

and location identifier by the PROFINET IO controller using the “write data

record” function. This is done using the maintenance data record “IM1” with

index AFF1

The “write data record” function is explained in detail in the general part A of the

manual in the description of the FCs for PROFINET IO.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

Pas de commentaire

Siemens SIMATIC NET CP 343-1 Manuel d'utilisateur Page 36