Siemens WFXD8400UC Spécifications télécharger pdf (Page 79)

2nd Edition/Revision 0 (4/28/04)

WFMC/WFXD Service Tips

–

Troubleshooting (3)

Symptom Problem Solution

Washer overheats.



Control module has

failed.



NTC failed.



Check voltage to heater. If voltage is present when heater

shouldn’t be on, replace faulty control module.



Disconnect NTC and measure resistance at terminals (~ 22.8 –

27.4 kΩ @ 20ºC (68ºF)). Replace NTC if faulty.

Door won’t lock.



Door isn’t closed

properly.



Door latch is broken.



Door lock has failed.



Close door securely. If door won’t latch, check door latch and

door hinge alignment.



Replace broken door latch.



Measure resistance of door lock mechanism (~ 159 - 211 Ω).

Replace faulty door lock mechanism.

WARNING! Unplug washer

before starting any repairs.

HINT: The washer test program diagnoses

problems quickly and thoroughly where resistance

measurements usually aren’t needed.

1 2 ... 74 75 76 77 78 79 80 81 82 83

Pas de commentaire

Siemens WFXD8400UC Spécifications Page 79