Siemens HE2425 Manuel d'utilisateur télécharger pdf (Page 43)

English 41

Self Help

The Cooktop Use these suggestions before calling for service to avoid service charges.

The Oven

Service

Table 11: Cooktop Troubleshooting Chart

Cooktop Problem Possible Causes and Suggested Solutions

Element cycles more than

usual

Pan base is warped and not making full contact with heating surface.

Base diameter of pan is too small for the size of the element.

Pan ingredients have boiled dry.

Material of pan is a poor heat conductor; heat transfers too slowly

A slight odor is noticeable

when an element is turned on

This is normal with new cooktops and will disappear after several uses

Cooktop controls will not turn

Range is not receiving power. Check the power source to see if a fuse has blown or if

the circuit breaker tripped. Check cord to see if it is inserted completely into outlet.

Cooktop panel is locked. Press and hold PANEL LOCK until indicator light turns off.

Scraper is not working prop-

erly.

The scraper blade is dull. The scraper is packaged with single-edge, stainless steel

blades. Replace with a standard single-edge blade.

Cooking results are not what

was expected.

The cooktop is not level. Adjust leveling legs on bottom of range.

Cooking pan is not the appropriate size or type. See “Cookware Selection Guide”.

Element cycles on the highest

setting

This is normal. The temperature limiter operates automatically to protect the glass

ceramic surface from extreme high temperature damage.

Water takes too long to boil Time to boil can vary greatly depending on environmental conditions. See “Boiling

Water” on page 25 for tips to decrease time to boil.

White cooktop appears to

have a green tint

The white cooktop may have a green tint while cooling down. This is normal. The cook-

top will return to its original color when the glass has cooled.

Table 12: Oven Troubleshooting Chart

Oven Problem

Possible Causes and

Suggested Solutions

The oven mode or temperature selected

or the numbers selected do not appear in

the display

The knob was turned too rapidly. Turn knob slower until correct wording or

temperature appears. Review manual instructions when setting clock,

timer, or Self-Clean.

Oven door is locked and will not release,

even after cooling

Turn the oven off at the circuit breaker and wait 5 minutes. Turn breaker

back on. The oven should reset itself and will be operable.

Oven is not heating Check circuit breaker or fuse box to your house. Make sure there is proper

electrical power to the oven. Be sure oven temperature has been selected.

Oven is not cooking evenly Adjust oven calibration if necessary (see “Change the Oven Temperature

Offset” on page 14). Refer to cooking charts for recommended rack posi-

tion.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Commentaires sur ces manuels

Pas de commentaire

Siemens HE2425 Manuel d'utilisateur Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Tiroirs chauffants Siemens HE2425