Siemens HiPath 8000 Manuel d'utilisateur télécharger pdf (Page 4)

Publication Date: 6 February 2007/ID Number: G00145605 Page 4 of

• Media Gateway support for the HiPath 8000 includes several options: Siemens HiPath

4000 v.3.0 via SIP; Siemens HiPath 3000 v.7.0 via SIP (pending release); Siemens RG

8700 and RG 2700; and third-party gateways (such as Cisco 3700 and Mediatrix),

although supported functionality depends on third-party adherence to the SIP standard.

• Basic survivability for remote locations is supported on the RG 8700, as well as on the

HiPath 4000 and 3000 when upgraded to support the HiPath 8000. Station-to-station

calls, public switched telephone network access and E9-1-1 services are available at all

times in remote locations.

• HiPath 8000 release 2.x uses SIP over Q.Signaling (SIP-Q) to interoperate with other

Siemens HiPath systems (such as HiPath 2000, 3000 and 4000).

• A single-server configuration for the HiPath 8000 is available with Siemens' Integrated

Media Server and HiPath Assistant for the 300 to 5,000 end-user scenario. Optional

redundancy is also available.

2.2 Telephone/Device Support

• Siemens' new OpenStage 20, 40, 60 and 80 SIP phones; Siemens' optiPoint 410 S/420

S; Siemens' optiClient 130 S; and Siemens' WL2 S.

• Tested third-party IP endpoints — Cisco, Grandstream Networks, Polycom,

Xten/CounterPath, Snom Technology, Zultys Technologies, ClearOne Communications

and WiSIP.

2.3 System Management and Administration

System management for the HiPath 8000 can be implemented in three ways:

• The iSuite — Network Management Center (iNMC), Service Management Center

(iSMC) and Subscriber Self-Care (iSSC) for systems with more than 5,000 users.

• The HiPath 8000 Assistant is an integrated administration tool for systems with fewer

than 5,000 users.

• The Command Line Interface is a more traditional system-provisioning and

administration option.

2.4 Network Signaling Support

• SIP, SIP-Q, Media Gateway Control Protocol, Q.SIG, T1/E1, Integrated Services Digital

Network Primary Rate Interface

2.5 Voice/Unified Messaging

• Supports Siemens HiPath Xpressions or third-party systems for unified messaging.

• Supports the IP Unity Mereon Unified Messaging solution — a scalable, carrier-class

unified messaging product.

• HiPath ComAssistant S is a Web-browser-based application that enables users to

manage incoming voice and e-mail communications from their desktops.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Siemens HiPath 8000 Manuel d'utilisateur Page 4