Siemens Gigaset SL1 Instructions d'exploitation télécharger pdf (Page 11)

Step by Step

Conducting calls – the basic functions

Activating/deactivating the handset

a Press the On-hook key until the activation or deactiva-

tion is confirmed by a crescendo tone sequence.

If your preferred language for the display texts is not

set, you can set this yourself.

If a mobile phone that is switched off is placed in the

charging shell, it will switch on.

If the PIN is still the same as the factory default (0000),

the phone is ready for operation.

If the PIN is not the same as the factory default, the PIN

must be entered to make the mobile phone ready for

operation.

Displaying the connection quality

The strength of the incoming signal is displayed by the

"receive field strength" icon in on or message status:

The radio range is different indoors and outdoors

(Æ page 97). Please consult your system administrator

in the event of range problems.

Note:

• The handset can only be fully switched off

when removed from the charging shell.

• After switching off a mobile phone, place it in

the charging shell; with PIN "0000" it will

switch on immediately and is ready for ope-

ration. If the PIN is not "0000", you must first

enter the PIN. Only then is the mobile phone

ready for operation.

• When a handset that is ready for operation is

placed in the charging shell it goes to idle sta-

tus and shows the idle display.

No receive field strength

Low receive field strength

50% receive field strength

100% receive field strength

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 110 111

Pas de commentaire

Siemens Gigaset SL1 Instructions d'exploitation Page 11