P1 Panelboards • Quick reference for selection and application
10
Standard Modifications
Type P1 Panelboards
Panel Options
Enclosures
• Extra gutter to sides or ends of the can
• 24” wide boxes
• Hinged trims
• Door-in-door trims
• Screw to the box trims
• Piano hinge trims
• Painted boxes
• Custom colors
• Increase gauge trims and boxes (See pages 12-13)
• Stainless steel trims and boxes
• Type 1 enclosures (Std 16 Gage / Optional 14 or 12 Gage)
• NEMA 3R/12 enclosures
• NEMA 4 enclosures
Panel Modifications
Enclosures
• Main Bus
Standard main bus is tin-plated aluminum. For copper main
bus, add from the table for each panel. Includes copper neutral
cross bar. For copper neutral branch lugs, see miscellaneous.
• Compression lug for MLO
1
• Contactor mains - Mount in 23” enclosure ahead of panel.
- Asco 920 through 225 amps
3
- Asco 911 through 150 amps
3
- Siemens LEN through 30 amps
3
• Branch and main breaker accessories
- Handle blocks
- Handle locks
• Feed-thru lugs
1
Cannot be used in conjunction with SPD/TVSS or subfeed
breakers. Do not add height to the panel.
Feed-thru
Lugs Amp
Rating Type
Connector
CU/AL Range
250
AL/CU
Mechanical
(1)–#6 AWG-
350 kcmil
CU
Mechanical
(1)–#6 AWG-
350 kcmil
AL/CU
Compression
(1)–#6 AWG-
350 kcmil
400
AL/CU
AWG Mechanical
(2)–#1/0 -
250 kcmil or
(1)–#2 AWG-
600 kcmil
CU (1)–1/0-600 kcmil
(2)-1/0-4/0
AL/CU
Compression
(1) 400-600 kcmil AL
(1) 400-500 kcmil CU
• 200% neutral
1
• Copper lugs, mechanical line and branch neutral
1
• Bus mounted SPD/TVSS
1
• Service entrance labeling
• Grounding of Panelboards
Ground Bars except for brazed to box are shipped with
the panel interior factory mounted.
- Non-Insulated Equipment Ground Bar – Standard
- Copper Non-Insulated Ground Bar
- AL Insulated Equipment Ground Bar
- CU Insulated Equipment Ground Bar
- Ground Bar Brazed to Box (recommended for painted boxes)
• Shunt Trip on Main or Branch
BL
2
, BLH
2
, HBL
2
, BQD
2
, xGB
2
as branch use 1” unit space for
shunt trip.
QJ2, QJ2-H, QJH2, ED2, ED4, ED6, HED4, HED6, HHED6, FD6, FXD6, HFD6
HFXD6, JXD6, JD6, HJD6, HJXD6, HQJ2H
• Remote control switches – 480V AC max. mounted in
a 23” enclosure to be cable connected to the panel.
• Time Clocks – mounted in a 23” enclosure to be cable
connected to the panel. Tork time clock can be supplied and
mounted in panelboard cabinet.
Time Clock Information and Options
Time Clock (1- or 2-Pole, Single or Double Throw Contacts,
3-Pole Single Throw) 277V Maximum with Plain Dial
Options:
Astronomical Dial
An Omitting Device
Reserve Power or Carryover
Space and Mounting Provisions Only
• NEMA 4X enclosures
• Special Keyed Locks (Keys are not supplied)
• Panel skirts
• Gaskets between trim and box
TEY
TEU1
Cat 60
LL803
LL806
All fit Fast-Latch Front
Yale 47 (NYC)
National C413A
Beck Lock 7-pin tumbler
Southco 1 4 Fastener
Corbin 1001 FAB7
Special non-Fast-Latch
Note: Specify copper or aluminum cable.
1 Do not increase panel or enclosure size.
2
Accessories on 1” pole breakers (BL, BQD, xGB, ED) will take 1” unit space.
3
External to the panel, supplied in a separate enclosure.
Commentaires sur ces manuels