AN39: USB Interface Description
3 USB Interface Functionality
13
s
HC15_USB_Interface_v02 Page 8 of 28 2007-04-05
Confidential / Preliminary
3 USB Interface Functionality
HC15 supports a USB 2.0 Full Speed (12Mbit/s) device interface (see [2]) with the following
default configuration settings:
The USB interface can be configured non-volatile by means of AT command (see [1],
AT^SUSB).
Table 1: Default configuration settings for USB interface
Parameter Description Default Setting (Factory)
startup USB interface configuration at startup. Default set-
ting: "MdmNet" enumerated USB composite
device.
"MdmNet"
maxpow Maximum power consumption of the USB device
from the USB bus (in mA).
10
powsrc Power source for USB device is either bus or self
powered.
"SELF"
mnto Timeout for the communication device class
request (in ms).
10000
mswprot Write protection for mass storage device is either
enabled or disabled.
"Disabled"
msoe USB interface configuration on ejecting the module
enumerated as mass storage device. Default set-
ting: "MdmNet" enumerated USB composite
device.
"MdmNet"
Commentaires sur ces manuels