HC15 AT Command Set
8.4 AT+CSQ
s
HC15_ATC_V01.001 Page 110 of 234 2/16/07
Confidential / Released
8.4 AT+CSQ Signal quality
The AT+CSQ execute command indicates the quality of the received signal strength.
Syntax
Parameter Description
0 -113 dBm or less
1 -111 dBm
2..30 -109... -53 dBm
31 -51 dBm or greater
99 not known or not detectable
99 The indication of the channel bit error rate is not supported. The value is always
99.
Note
• After using network related commands such as AT+CCWA, AT+CCFC, users are advised to wait 3s before
entering AT+CSQ. This is recommended to be sure that any network access required for the preceding com-
mand has finished.
Test Command
AT+CSQ=?
Response(s)
+CSQ: (list of supported<rssi>s), (list of supported<ber>s)
OK
Exec Command
AT+CSQ
Response(s)
+CSQ: <rssi>,<ber>
OK
Reference(s) PIN USB0-MDM USB0-APP Last
GSM 07.07 + + + -
<rssi>
(num)
<ber>
(num)
Commentaires sur ces manuels