Siemens miniTek Manuel d'utilisateur télécharger pdf

CONNECTING A SIEMENS MINITEK TO A REDCAT, 855 OR 885 SYSTEM

Below appears advice from Siemens which Hear and Learn has tailored

to suit connection to Lightspeed Classroom Sound Enhancement

products.

FOR TECHNICAL SUPPORT PERTAINING TO SIEMENS DEVICES, CALL

1300 787 797 EXT2

You can watch TV or listen to your stereo wirelessly with your miniTek. All you

need to do is plug the provided Tek transmitter into your external device, and

follow the instructions below. By streaming the sound via Bluetooth from the tiny

Tek transmitter, you will get a clear, easy to understand signal, with no audio

delay. While the miniTek comes standard with one Tek transmitter, there is the

option to purchase a second transmitter to connect to another external device.

With the miniTek you will remain connected to your entertainment of choice,

without wires.

miniTek

Telephone button

2 Stand-by/mute

3 on/off button

4 Audio source button

5 Volume up/volume down

6 Program change button

Tek Transmitter

On/off switch

2 Sound level button

3 Socket for power plug

4 2.5mm stereo socket

5 LED

1 2 3 4

Page 1

CONNECTING A SIEMENS MINITEK TO A REDCAT, 855 OR 885 SYSTEM Below appears advice from Siemens which Hear and Learn has tailored to suit c

Charging the transmitter You will need to charge the transmitter before first use. Connect the transmitter with the power plug to a

Use the 3.5 mm male plug to 3.5 mm male plug cable supplied with the minitek - shown below - to connect to the ALD output on the Hear and Learn RedCA

Page 4

Using the transmitter Press the on/off button on the miniTek for about 3 seconds to turn miniTek on. Turn the transmitter on with the on/off switc

Plus de documents pour Électronique des véhicules automobiles Siemens miniTek

Pas de commentaire