Siemens Simatic M7-400 Manuel d'utilisateur télécharger pdf (Page 3)

SIMATIC S7-400

Introduction

S7-400/S7-400H/S7-400F/FH

6/3

Siemens ST 70 · 2013

■

Overview (continued)

S7-400F/FH

• Failsafe automation system for plants with increased safety

requirements

• Complies with safety requirements to SIL 3 in accordance with

IEC 61508, AK6 in accordance with DIN V 19250 and Cat. 4

in accordance with EN 954-1

• If required, also fault tolerant through redundant design

• Without additional wiring of the safety-related I/O:

• Safety-relevant communication via PROFIBUS DP with

PROFIsafe profile

• Based on S7-400H and ET 200M with fail-safe modules

• Standard modules for non-safety-related applications can

also be used in the automation system

• Isolation module for joint use of fail-safe and standard

modules in safety mode in one ET 200M

■

Technical specifications

General technical data

Degree of protection

IP20

Ambient temperature 0 to 60 °C

Relative humidity

5 to 95%, no condensation

Atmospheric pressure 1080 to 795 hPa (corresponds to

an altitude of 1000 m to 2000 m)

Electromagnetic compatibility

• Interference immunity According to EN 61000-6-2

• Emitted interference

According to EN 61000-6-4

Mechanical load

• Vibration, test according to /

tested with

IEC 60068-2-6 (sine)

10 to 58 Hz; constant amplitude

0.075 mm;

58 to 500 Hz; constant acceleration

1 g; duration of oscillation:

10 frequency sweeps per axis in

each direction of the three mutually

perpendicular axes

• Shock, test according to /

tested with

IEC 60068-2-27

Type of shock: Half-sine;

strength of the shock 10 g

(peak value), duration 6 ms

direction of shock: 100 shocks in

each of the 3 mutually perpendicular

axes.

Kap_06_eng.book Seite 3 Donnerstag, 2. Mai 2013 4:16 16

1 2 3 4 5 6 7 8 ... 157 158

SIMATIC S7-400 1

Commentaires sur ces manuels

Pas de commentaire

Siemens Simatic M7-400 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Siemens Simatic M7-400